Aalto University - ARTS 3D Printing

Структура за темами

• 3 - Machines & Equipment
  In this section you will familiarize yourself with the machines and equipment you will find at the workshop, so that you can plan and execute your working tasks successfully.

  You will also learn the steps for printing with each machine, and where can you book a time to use them. Click on the page of each machine to find out more in-depth information about them.

  
  

  • ATTENTION! Every machine at the workshop is marked with traffic light colours to promote their safe use in workshops:

     RED: Only staff can operate this machine.

     ORANGE: Students can operate this machine under staff supervision and following a relevant induction.

     GREEN: Students can operate independently this machine following a relevant induction.

    
    

  • 3D Printers

  • 

    Ultimaker 2+ & Ultimaker 3 Сторінка

    

    Ultimakers are Material Extrusion (FFF or FDM) printers.

    At the workshop we have (6) Ultimaker 2 and (2) Ultimaker 3.

    These machines are labelled GREEN.

  • 

    MakerBot Replicator Z18 Сторінка

    

    MakerBot Replicator Z18 is a Material Extrusion (FFF or FDM) printer.

    At the workshop we have 1 MakerBot printer

    These machines are labelled GREEN.

  • 

    BQ Witbox 2 Сторінка

    

    BQ Witbox 2 is a Material Extrusion (FFF or FDM) printer.

    At the workshop we have 1 Witbox printer

    These machines are labelled GREEN.

  • 

    Formlabs Form 2 Сторінка

    

    Formlabs Form 2 is a VAT Polymerization (SLA) printer.

    At the workshop we have 2 Formlabs printers

    These machines are labelled ORANGE.

  • 

    BigRep One Сторінка

    

    BigRep One is a Material Extrusion (FFF or FDM) printer.

    At the workshop we have 1 BigRep.

    These machines are labelled ORANGE.

  • 

    Delta Wasp Clay 40100 Сторінка

    

    Delta Wasp Clay 40100 is a Material Extrusion (FFF or FDM) printer.

    At the workshop we have 1 clay printer

    This machine is labelled ORANGE.

  • 

    Stratasys Prodigy Plus & uPrint SE Plus Сторінка

    

    Stratasys Prodigy Plus & uPrint SE are Material Extrusion (FFF or FDM) printers.

    At the workshop we have 2 printer

    This machine is labelled RED.

  • 

    Stratasys Objet Connex350 Сторінка

    

    Objet Connex 350 is a Material Jetting (Polyjet Printing) printer.

    At the workshop we have 1  printer

    This machine is labelled RED.

  • Collaborative Robots

  • 

    Universal Robot UR10 Сторінка

    

    Universal Robot is a Collaborative Robot arm with a 10kg Payload.

    At the workshop we have (1) UR10 equipped with different grippers and accessories
    

    This machine is labelled RED.