Aalto University - ARTS 3D Printing
Delta Wasp Clay 40100
Saven pursotukseen perustuva 3D tulostin
- Määrä: 1
- Materiaali vaihtoehdot: Savi
- Maks. työkappaleen koko: ⌀ 400 x 1000 mm
- Kerrospaksuus: 0.1 mm, 0.2 mm
Lisätietoja valmistajan sivuilta.
5. In the Extruder 1 tab, copy the settings as they are shown in the following image:
6. Download the following print profiles to your computer: (Click on the links below)
This profiles will give you basic settings for each nozzle. You can also modify them to your liking afterwards.
7. In the upper menu, go to Settings>Printer>Manage Printers and select the tab Profiles.
8. Click on Import, and select the profile files you just downloaded and open them.
Now you are ready to slice your file and print them!
3. General instructions and rules
+ Make sure that the extruder nozzle is empty, clean and without obstruction before use
+ Make sure that the two tank caps are tight before the pressurization of the tank
+ Confine long hair or loose clothing before using the machine.
+ Do not exceed the maximum pressure (8 bar)
+ Do not put your fingers inside the extruder
+ Do not ingest any extruded material
+ Do not introduce or place hands or other parts of the body near the moving parts
+ Do not perform modifications or maintenance to this machine without previous approval
BEFORE STARTING
+ Make sure that the nozzle is unobstructed and the building plate clean
+ Check air pressure is connected and open
+ Check distance between nozzle and plate and calibrate ZMAX (Menu>Prepare>Modify ZMax)
+ Wet the plaster plate thoroughly
AFTER FINISHING
+ Leave the build plate clean, the air pressure closed and the nozzle closed or under water
+ Do not load/unload material by yourself